Sapido RB-1632 User Manual Download Page 62

Page: 62 / 87

http://www.sapido.com.tw/ User Manual 1.0

Caution: To prevent that firmware upgrading is interrupted by other wireless signals and causes failure.

We recommend users to use wired connection during upgrading.

Caution: The firmware upgrade will not remove your previous settings.

Reset button:

On the back of this router, there is a reset button. If you can not login the administrator page

by forgetting your password; or the router has problem you can’t solve.

You can push the

reset button for 10 seconds with a stick. The router will reboot and all settings will be restored

to factory default settings. If the problem still exists, you can visit our web site to see if there is

any firmware for download to solve the problem.

6.3.3

Profile Save

Users can create a backup file that contains current router settings. This backup file can be

used to restore router settings. This is especially useful in the event you need to reset the

router to its default settings.

Summary of Contents for RB-1632
























































































Search results

Summary of Contents for RB-1632

Reviews:

Related manuals for RB-1632

Brands by name

Popular brands

Sapido RB-1632, User Manual

Search results

Summary of Contents for RB-1632

Reviews:

Related manuals for RB-1632

Brands by name

Popular brands