Sapido RB-1632 User Manual Download Page 59

Page: 59 / 87

http://www.sapido.com.tw/ User Manual 1.0

6.2.2

WPS

This page allows user to change the setting for WPS (Wi-Fi Protected Setup). Using this

feature could let your wireless client atomically synchronize it’s setting and connect to the

Access Point in a minute without any hassle. RB-1632 could support both Self-PIN or PBC

modes, or use the WPS button (at real panel) to easy enable the WPS function.

PIN model, in which a PIN has to be taken either from a sticker label or from the web

interface of the WPS device. This PIN will then be entered in the AP or client WPS device to

connect.

PBC model, in which the user simply has to push a button, either an actual or a virtual one,

on both WPS devices to connect.

Please follow instructions below to enable the WPS function.

Start PIN:

Start PBC:

Setp 1. Press the WPS button (1) from RB-1632 and wait for Wireless/WPS LED light (2)

changed into red.

Summary of Contents for RB-1632
























































































Search results

Summary of Contents for RB-1632

Reviews:

Related manuals for RB-1632

Brands by name

Popular brands

Sapido RB-1632, User Manual

Search results

Summary of Contents for RB-1632

Reviews:

Related manuals for RB-1632

Brands by name

Popular brands