Sapido RB-1632 User Manual Download Page 38

Page: 38 / 87

http://www.sapido.com.tw/ User Manual 1.0

Item

Description

Disable Wireless LAN
Interface

Turn off the wireless service.

Band

Select the frequency. It has 6 options: 2.4 GHz
(B/G/N/B+G/G+N/B+G+N).

Mode

Select the mode. It has 3 modes to select: (AP, Client, WDS,
AP+WDS).

Multiple AP: Please check Section 4.1.2.1.

SSID

Service Set identifier, users can define to any or keep as default.

Channel Width

Please select the channel width, it has 2 options: 20MHZ, and
40MHZ.

Control Sideband

Enable this function will control your router use lower or upper
channel.

Channel Number

Please select the channel; it has Auto, 1, 2~11 or 13 options.

Broadband SSID

User may choose to enable Broadcast SSID or not.

Data Rate

Please select the data transmission rate.

Associate Clients

Check the AP connectors and the Wireless connecting status.

Summary of Contents for RB-1632
























































































Search results

Summary of Contents for RB-1632

Reviews:

Related manuals for RB-1632

Brands by name

Popular brands

Sapido RB-1632, User Manual

Search results

Summary of Contents for RB-1632

Reviews:

Related manuals for RB-1632

Brands by name

Popular brands