Sapido N+ Mini Broadband Router User Manual Download Page 39

Page: 39 / 203

http://www.sapido.com.tw

User Manual V1.0

4.2.3.9

WAN Access Type – L2TP

You can access a private network through the Internet or other public network by using a

virtual private network (VPN) connection with the Layer Two Tunneling Protocol (L2TP). L2TP

is an industry-standard Internet tunneling protocol with roughly the same functionality as the

Point-to-Point Tunneling Protocol (PPTP).

Apply 3G or 3.5G transmission rate for the backup. Once Dynamic IP connection is

disconnected, the system automatically connects Internet via 3.5G adapter. If 3.5G signal is

not available, it starts to search downward for 3/2.75/2.5G signals until none existed.

Setting up the interval time to auto detect whether the Internet connection is lost or not. If yes,

the system immediately switches to 3.5G Internet connection and will disconnect when the

original PPTP connection recovers.

Summary of Contents for N+ Mini Broadband Router












































































































































































































Search results

Summary of Contents for N+ Mini Broadband Router

Reviews:

Related manuals for N+ Mini Broadband Router

Brands by name

Popular brands

Sapido N+ Mini Broadband Router, User Manual

Search results

Summary of Contents for N+ Mini Broadband Router

Reviews:

Related manuals for N+ Mini Broadband Router

Brands by name

Popular brands