Sapido N+ Mini Broadband Router User Manual Download Page 37

Page: 37 / 203

http://www.sapido.com.tw

User Manual V1.0

is not available, it starts to search downward for 3/2.75/2.5G signals until none existed.

Setting up the interval time to auto detect whether the Internet connection is lost or not. If yes,

the system immediately switches to 3.5G Internet connection and will disconnect when the

original PPPoE connection recovers.

Click on

Next

button to go on next setting page.

4.2.3.8

WAN Access Type – PPTP

This option is typically used for DSL services. Some DSL service providers supply a special

DSL modem. This kind of modem only supports the PPTP tunnel to access the Internet, you

should create a PPTP tunnel that carries a PPP session and terminates on the DSL model.

Once the tunnel has been established, this kind of DSL modem will forward the PPP session

to the ISP. As long as the PPP session is connected, all the local users will be able to share

this PPP session to access to the Internet.

Summary of Contents for N+ Mini Broadband Router












































































































































































































Search results

Summary of Contents for N+ Mini Broadband Router

Reviews:

Related manuals for N+ Mini Broadband Router

Brands by name

Popular brands

Sapido N+ Mini Broadband Router, User Manual

Search results

Summary of Contents for N+ Mini Broadband Router

Reviews:

Related manuals for N+ Mini Broadband Router

Brands by name

Popular brands