Sapido GR-1736 Page 74 User Manual Download

Page: 74 / 102

http://www.sapido.com.tw/

User Manual v1.0.0

Users can synchronize the local clock on the router to an available NTP server (optional). To
complete this setting, enable NTP client update and select the correct Time Zone.

Item

Description

Current Time

Users can input the time manually.

Time Zone Select

Please select the time zone.

Enable NTP client update

Please select to enable NTP client update or not.

Automatically Adjust

Daylight Saving

Please select to enable Automatically Adjust Daylight Saving or

not.

NTP Server

Please select the NTP server from the pull-down list, or you can

enter the NTP server IP address manually.

Apply Changes & Reset &

Refresh

Please click on Apply Changes to save the setting data. Or you

may click on Reset to clear all the input data. Or you may click on

Refresh to update the system time on the screen.

6.3.7 UPnP

Setting

Summary of Contents for GR-1736







































































































Search results

Summary of Contents for GR-1736

Reviews:

Related manuals for GR-1736

Brands by name

Popular brands

Sapido GR-1736, User Manual

Search results

Summary of Contents for GR-1736

Reviews:

Related manuals for GR-1736

Brands by name

Popular brands