manualshive.com logo in svg

Sapido GR-1736, User Manual, Page: 70 / 102

Share
Download
Sapido GR-1736 User Manual Download Page 70

http://www.sapido.com.tw/

 

 

            User Manual v1.0.0 

70

(http://www.amigo.com.tw) to see if there is any later version of firmware. Download the 
firmware to your computer, click Browser and point to the new firmware file.    Click Upload to 
upgrade the firmware. You can’t make any move unless the machine reboot completely. 

 

Caution:    To prevent that firmware upgrading is interrupted by other wireless signals and causes failure. 

We recommend users to use wired connection during upgrading. 

 

Note: The firmware upgrade will not remove your previous settings. 

 

 

Reset button: 

On the front of this router, there is a reset button. If you cannot login the administrator page by 
forgetting your password; or the router has problem you can’t solve. You can push the reset 
button for 5 seconds with a stick. The router will reboot and all settings will be restored to 
factory default settings. If the problem still exists, you can visit our web site to see if there is 
any firmware for download to solve the problem.   

 

 

6.3.4 Profile 

Save 

Users can create a backup file that contains current router settings. This backup file can be 
used to restore router settings. This is especially useful in the event you need to reset the 
router to its default settings. 

Summary of Contents for GR-1736







































































































Reviews:

No comments