User Manual & Datasheet V 2.3
20
Product Selection Order Code
Product
ELIXIR - Liquid Level Switch for Sticky, Corrosive, Agitated, Splashing, Foaming Liquids suitable for liquids with viscosity up to
10,000cp
Type
I : Integral (sensor in same unit)
Housing
SCUTE : Pressure Die Cast Aluminium weather proof (Rating IP68) SCUTE
FP2C : Cast Aluminium weather & flame proof powder coated suitable for gas group IIC
Indication (Optional)
WL : External LED Indication (Only with “SCUTE”)
Probe Housing Cable Entry
PCPG13 : PG 13.5, Polyamide
PCB5D : 1/2” BSP, DC Gland, Brass
PCN5D : 1/2” NPT, DC Gland, Brass
Output (Depends on “Vibrating Fork” & “Power Supply”)
SPN : SPDT Relay output 1NO, 1NC (Relay rated at 6 A, 230 V AC for non-inductive load) and PNP output (only for
supply voltage
18V to 35V DC)
D : 2NO, 2NC DPDT Relay Output (rated at 6 A, 230 V AC for non-inductive load)
NMR : Namur type current output at 8.2V (ION=2.2 to 2.5 mA and IOFF=0.8 to 1.0 mA) (Only with “VF44”, “DC6”)
MA1 : 8/16 mA 2-wire Loop powered current output at 24V DC (Only with "VF44", "DC")
Power Supply (Depends on “Vibrating Fork” & “Output”)
U : Universal (18 to 55V DC) and (90 to 265V at 50Hz AC)
DC6 : 8.2V DC supplied by NAMUR certified isolator (Only with "VF44", "NAMUR")
DC : 24V DC (Only with "VF44", "MA1")
Insulation (Depends on “Vibrating Fork & “Mounting”) (Optional)
CHLR : HALAR (ECTFE) (Only with “VF110” & with “Flange”)(Only with “15T”)
Mounting (Depends on “Vibrating Fork”)
MB5S4 : Screwed Thread, BSP 1/2”, SS 304
MB5S6 : Screwed Thread, BSP 1/2”, SS 316
MN5S4 : Screwed Thread, NPT 1/2”, SS 304
MN5S6 : Screwed Thread, NPT 1/2”, SS 316
MB75S4 : Screwed Thread, BSP 3/4”, SS 304
MB75S6 : Screwed Thread, BSP 3/4”, SS 316
MN75S4 : Screwed Thread, NPT 3/4”, SS 304
MN75S6 : Screwed Thread, NPT 3/4”, SS 316
MB10S4 : Screwed Thread, BSP 1”, SS 304
MB10S6 : Screwed Thread, BSP 1”, SS 316
MN10S4 : Screwed Thread, NPT 1”, SS 304
MN10S6 : Screwed Thread, NPT 1”, SS 316
Sapcon Instruments Pvt.Ltd.
R
15
