§ Wing Control Surfaces
8
Viper Jet MKII Composite
Attach Control Horns
Required Parts
o
o
o
o
Wing [W]
o
o
o
o
Aileron Control Horns (2) [H6]
o
o
o
o
Flap Control Horns (2) [H6]
Required Tools and Adhesives
®
®
®
®
Hobby Knife
®
®
®
®
Sandpaper
®
®
®
®
12 Minute Epoxy Adhesive
}}}}
There are two types of control horns provided,
the straight control horns are for the flaps and
the angled control horns are for the ailerons,
rudder and elevators.
Fiberglass control horns
}}}}
Separate the control horns from each other with
a hobby knife. Clean up the edges using some
sand paper or a small file. Set aside 3 control
horns for the rudder and the elevators, these
will be used later.
Control horns separated and cleaned up
}}}}
Find the control horn mounting slots in the
control surfaces and remove the covering using
a sharp hobby knife. Dry fit the control horns
}}}}
Once you have a good fit bond the control horns
to the control surfaces using epoxy adhesive.
Mount control horns with epoxy adhesive