Sanyo XU88 - PLC XGA LCD Projector Owner'S Manual Download

Page: 7 / 77

Safety Instructions

Openings in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect it

from overheating, these openings must not be blocked

or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using

or installing the projector, the following precautions

should be taken.

– Do not put any flammable object or spray can near the

projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from any

objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic parts. These areas will

become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also may cause

fire hazard by heat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperature inside the projector.

CAUTION IN CARRYING OR TRANSPORTING

THE PROJECTOR

– Do not drop or bump the projector, otherwise damages

or malfunctions may result.

– When carrying the projector, use a suitable carrying case.

– Do not transport the projector by courier or any other

transport service in an unsuitable transport case. This

may cause damage to the projector. For information

about transporting the projector by courier or any other

transport service, consult your dealer.

– Do not put the projector in a case before the projector is

cooled enough.

Moving the Projector

When moving the projector, replace the lens cap and

retract adjustable feet to prevent damage to the lens

and cabinet.

When the projector is not in use for an extended period,

put it into a suitable case with the lens side up.

Air Circulation

Air Intake

Vent

Air intake Vent

Exhaust Vent

(Hot air exhaust)

Air Intake Vent

Do not tilt the projector more than 20

degrees from side to side.

Do not point the projector up to project an

image.

Do not point the projector down to project

an image.

Do not put the projector on either side to

project an image.

Install the projector properly. Improper Installation may

reduce the lamp life and cause a fire hazard.

Installing the Projector in Proper Position

Exhaust Vent

(Hot air exhaust)

Summary of Contents for XU88 - PLC XGA LCD Projector














































































Search results

Summary of Contents for XU88 - PLC XGA LCD Projector

Reviews:

Related manuals for XU88 - PLC XGA LCD Projector

Brands by name

Popular brands

Sanyo XU88 - PLC XGA LCD Projector, Owner'S Manual

Search results

Summary of Contents for XU88 - PLC XGA LCD Projector

Reviews:

Related manuals for XU88 - PLC XGA LCD Projector

Brands by name

Popular brands