Sanyo XU88 - PLC XGA LCD Projector Owner'S Manual Download

Page: 49 / 77

Setting

Logo PIN code lock

Setting

This function prevents an unauthorized person from

changing the screen logo.

Off ............ The screen logo can be changed freely from

the Logo Menu (p.48).

On ............ The screen logo cannot be changed without

a Logo PIN code.

If you want to change the Logo PIN code lock setting,

press the SELECT button and the Logo PIN code dialog

box appears. Enter a Logo PIN code by following the

steps below. The initial Logo PIN code is set to “4321” at

the factory.

Logo PIN code lock

Enter a Logo PIN code

Use the Point

▲▼

buttons to enter a number. Press the

Point

►

button to fix the number and move the red frame

pointer to the next box. The number changes to “



.” If

you fixed an incorrect number, use the Point

◄

button to

move the pointer to the number you want to correct, and

then enter the correct number.

Repeat this step to complete entering a four-digit

number.

After entering the four-digit number, move the pointer to

“Set.” Press the SELECT button so that you can start to

operate the projector.

If you entered an incorrect Logo PIN code, “Logo PIN

code” and the number (

   

) will turn red for a

moment. Enter the correct Logo PIN code all over again.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit

number. Press the Point

▼

button to select “Logo PIN

code change” and then press the SELECT button. The

New Logo PIN code input dialog box appears. Set a new

Logo PIN code.

Be sure to note the new Logo PIN code and keep it at

hand. If you lost the number, you could no longer change

the Logo PIN code setting. For details on PIN code

setting, refer to “PIN code lock” on pages 53–54.

Use the Point

◄►

buttons to switch On/Off, and then

press the Point

▼

button to move the pointer to “Quit.”

Press the SELECT button to close the dialog box.

Change the Logo PIN code lock setting

Enter a Logo PIN code

After a correct Logo PIN code

is entered, the following dialog

box appears.

CAUTION:

wHEN yOU HAVE CHANGED THE LOGO

PIN CODE, wRITE DOwN THE NEw PIN

CODE IN COLUMN OF THE LOGO PIN CODE

NO . MEMO ON PAGE 75, AND KEEP IT

SECURELy . SHOULD THE LOGO PIN CODE

BE LOST OR FORGOTTEN, THE LOGO

PIN CODE SETTING CAN NO LONGER BE

CHANGED .

Change the Logo PIN code lock setting

Change the Logo PIN code

Use the Point

◄►

buttons to

switch On/Off.

Summary of Contents for XU88 - PLC XGA LCD Projector














































































Search results

Summary of Contents for XU88 - PLC XGA LCD Projector

Reviews:

Related manuals for XU88 - PLC XGA LCD Projector

Brands by name

Popular brands

Sanyo XU88 - PLC XGA LCD Projector, Owner'S Manual

Search results

Summary of Contents for XU88 - PLC XGA LCD Projector

Reviews:

Related manuals for XU88 - PLC XGA LCD Projector

Brands by name

Popular brands