background image

57

Setting

The Warning Temp. indicator shows the state of the function which protects the projector. Check the state of the 

Warning Temp. indicator and the POWER indicator to take proper maintenance. 

wARNING TEMP . indicator

The projector is shut down and the warning Temp . 

indicator is blinking red .

When  the  temperature  inside  the  projector  reaches  a  certain 

level,  the  projector  will  be  automatically  shut  down  to  protect 

the  inside  of  the  projector. The  POWER  indicator  is  blinking 

while the projector is being cooled down. When the projector 

has cooled down enough (to its normal operating temperature), 

it can be turned on again by pressing the POWER ON/STAND-

BY button.

The projector is shut down and the warning Temp . 

indicator lights red .

When  the  projector  detects  an  abnormal  condition,  it  is 

automatically shut down to protect the inside of the projector 

and  the  Warning  Temp.  indicator  lights  red.  In  this  case, 

unplug  the AC  power  cord  and  reconnect  it,  and  then 

turn  the  projector  on  once  again  to  verify  operation.  If  the 

projector  cannot  be  turned  on  and  the  Warning  Temp. 

indicator  still  lights  red,  unplug  the AC  power  cord  and 

contact the service station. 

CAUTION

DO NOT LEAVE THE PROJECTOR WITH THE 

AC POWER CORD CONNECTED UNDER AN 

ABNORMAL CONDITION. IT MAY RESULT IN 

FIRE OR ELECTRIC SHOCK.  

Maintenance and Cleaning

Top Control

Top Control

Note:

  • The Warning Temp. indicator continues to blink even 

after the temperature inside the projector returns to 

normal.  When  the  projector  is  turned  on  again,  the 

Warning Temp. indicator stops blinking. 

Then check the matters below:

–  Did you provide appropriate space for the projector to be 

ventilated? Check the installing condition to see if the air 

vents of the projector are not blocked.

–  Has the projector been installed near an Air-Conditioning/ 

Heating  Duct  or  Vent?  Move  the  installation  of  the 

projector away from the duct or vent.

–  Is the filter clean? Clean the filter periodically.

WARNING TEMP.

emit a red light

WARNING  TEMP.

blinking red

Summary of Contents for XU88 - PLC XGA LCD Projector














































































Reviews: