Insert the card
The card can be used after it has been formatted with the camera (see page
120).
When inserting the card, make sure that it is correctly oriented.
Take special care to orient the card correctly when inserting it. Attempting to
insert the card incorrectly may result in damage.
HINT
About the internal backup battery
œ
This camera’s internal battery serves to maintain the date and time
settings, as well as the shooting settings. The backup battery will be fully
charged when the batteries are kept in the camera continuously for about 2
days. In the fully charged state, the backup battery will maintain the camera
settings for about 7 days.
When not using the camera for a long time, remove the batteries
œ
A small amount of power is still used even if the digital camera is turned off,
and it is therefore recommended that the batteries be removed from the
camera if it is not going to be used for a long time. Note that when the
batteries are removed for a long period, the time and date settings may be
cleared. Before using your camera again, be sure to confirm that the
camera settings are correct.
Open battery compartment cover
on the camera bottom.
Insert all the way until it clicks.
Close the battery compartment
cover.
Do not attempt to forcefully
remove the card.
œ
To remove the card...
1
Open
2
Push
down
3
Pull out
[
l
] mark
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
English
22
Summary of Contents for Xacti VPC-S1
Page 157: ...SANYO Electric Co Ltd ...
