Sanyo Xacti VPC-J4 Page 156 Instruction Manual Download

Page: 156 / 186

153

English

DIRECT-PRINT (PictBridge PRINT)

Adjust the printer settings.

Press the [

] or [

] arrow button to select the printer setting parame-

ter, and press the SET button.

The screen to set the selected parameter appears.

Press the [

] or [

] arrow button to adjust the setting, and press the

SET button.

The selected parameter is set, and you are returned to the Printer
Settings Screen.

Follow the same procedure to adjust the other parameters, as
desired.

The contents of the settings that can be made for each parameter
will differ depending on the printer.

<When “PRINTER SETTINGS” is selected>

The images will be printed according to the setting specified on
the printer side.

Select “EXIT”, and press the SET button.

You are returned to the PictBridge Screen.

HINT

The printer setting parameters will differ depending on the printer that is
connected.

To use printer functions which do not appear on your camera’s Printer Set-
tings Screen, select “PRINTER VALUE”.

If a function set by the camera is not available in the printer, the camera’s
printer setting will automatically change to “PRINTER VALUE”.

Summary of Contents for Xacti VPC-J4



























































































































































































Search results

Summary of Contents for Xacti VPC-J4

Reviews:

Related manuals for Xacti VPC-J4

Brands by name

Popular brands

Sanyo Xacti VPC-J4, Instruction Manual

Search results

Summary of Contents for Xacti VPC-J4

Reviews:

Related manuals for Xacti VPC-J4

Brands by name

Popular brands