Sanyo Xacti VPC-C1 Instruction Manual Download Page 151

Page: 151 / 176

English

148

Adjust the printer settings.

Toggle the SET button up or down
to select a printer setting
parameter, and press the SET
button.

The screen to set the selected
parameter appears.

Toggle the SET button up or down
to adjust the setting, and press the
SET button.

The selected parameter is set,
and you are returned to the
Printer Settings Screen.

Follow the same procedure to
adjust the other parameters, as
desired.

The contents of the settings that
can be made for each parameter
will differ depending on the
printer.

<When “PRINTER VALUE” is selected>

The images will be printed
according to the settings
specified on the printer side.

Select “EXIT”, and press the SET
button.

You are returned to the Printing
Mode Screen.

Note

The printer setting parameters will differ depending on the printer that is
connected.

To use printer functions which do not appear on your camera’s Printer
Settings Screen, select “PRINTER SETTINGS”.

If a function set by the camera is not available in the printer, the camera’s
printer settings will automatically change to “PRINTER SETTINGS”.

%( !"#

Summary of Contents for Xacti VPC-C1

















































































































































































Search results

Summary of Contents for Xacti VPC-C1

Reviews:

Related manuals for Xacti VPC-C1

Brands by name

Popular brands

Sanyo Xacti VPC-C1, Instruction Manual

Search results

Summary of Contents for Xacti VPC-C1

Reviews:

Related manuals for Xacti VPC-C1

Brands by name

Popular brands