85
EZ Television (Analog)
Information
• Perform initialization before using this service. If you have not performed initialization
yet, see page 22.
• No packet communication or other charges are billed as long as you are just watching
EZ Television (A). However, you will be charged for packet communication if you access
a program guide or song title search services.
• When the battery level is “
”, you cannot start the EZ Television (A).
• If the battery level changes to “
” during use of the EZ Television (A), the EZ Television
(A) will end automatically.
• The continuous audible time is about 1 hour in the W33SA. After 1 hour of starting the
EZ Television (A), the EZ Television (A) ends automatically.
• The layout and contents of the screens shown here are only an example and are
subject to change.
■
Viewing and Operating the EZ Television Screen
■
For Better EZ Television Reception
Deteriorated image, poor sound quality or reception failure may occur in mountains,
near buildings, in underpasses, in tunnels, or indoors because of poor TV reception.
To improve the reception of airwaves, try the following:
• The W33SA Antenna (EZ Television/EZ·FM Reception) and SANYO Flat-type Stereo
Earphones 03 serve as an antenna. Extend the W33SA Antenna (EZ Television/EZ·FM
Reception), or connect SANYO Flat-type Stereo Earphones 03 and strain the earphone
cord, and then turn it towards the direction where reception is best.
• When you are indoors, take your W33SA as close to a window as possible.
●
Channel indicator
The current channel is
displayed.
Use
s
, the dial key,
*
, or
#
to change the channel.
●
Information window
Information from the current
broadcast station is displayed.
●
Program information
window
The name and on-air time
of the current program are
displayed.
●
Screen size switch
Press
N
to switch to
full-screen display.
< Full-screen display >
●
Earphone display
This is displayed when “
スピー
カー切替
(Switch Speakers)” is
set to “
イヤホン
(Earphones)”.
●
Volume indicator
The current volume level (in 21
steps, including mute) is displayed.
Use
j
to adjust the volume
level.
KDDI powered by NANO Media Inc.
