Sanyo VPC-X1200, Instruction Manual

Page: 34 / 72

25
English
CAPTURING AND PLAYING BACK STILL IMAGES
4
Release your finger from the shutter button.
h
The captured image is recorded.
HINT
About the target mark
i
A target mark
&
on the monitor shows
the area the camera is focusing on.
i
The camera automatically determines
the correct focus by measuring from 9
different focus points within the
shooting area. If the target mark is at a
position that is different from the point
you wish to focus on, you can refocus,
for example, by changing the shooting
angle.
i
The large target mark appears when
the camera focuses on a wide area in
the center of the screen.
About the focus indicator
i
A green focus indicator appears when
the subject is successfully focused, or
a red focus indicator when the camera
was not able to focus the subject.
The shutter speed and aperture are
displayed
i
The shutter speed and aperture
settings are also displayed on the
monitor. You can use them as a
reference when shooting.
If the motion alert icon appears...
i
During still image shooting, if the shutter speed is slow and the possibility
that the image may be blurred due to camera shake becomes high, the
motion alert icon may appear on the monitor. In this case, use a tripod to
stabilize the camera when shooting, or set the flash operation mode to
automatic (page 48).
i
When shooting with the fireworks
H
scene function, the motion alert icon
always appears, but this is normal.
F5.2
1/102
1/2
F5.2
Shutter speed
Aperture
Target mark
Motion alert icon
Focus indicator