Sanyo VPC-X1200, Instruction Manual

Page: 19 / 72

English
10
About the CHARGE indicator
The CHARGE indicator shows the status of the battery pack and the charger.
Please refer to the following table if the indicator flashes abnormally.
CAUTION
Do not charge the battery pack immediately after the camera has been
in continuous use for a long time
i
The battery pack becomes hot when the camera is used continuously for a
long time. If you attempt to charge the battery pack in this state, the safety
function may be activated and it may not be possible to charge the battery
pack. Wait until the battery pack has cooled down before attempting to
charge it.
Does the battery pack appear swollen?
i
The lithium-ion battery used in this camera may expand slightly when
stored in a hot environment or repeatedly used, but this is not a safety
hazard.
CHARGE indicator
Not lit Not connected properly
i
To recharge the battery pack, the power cord of the
charger must be connected to a power outlet, and the
plug at the other end inserted in the charger’s power
socket (page 8).
i
The battery pack is not installed, or it is not installed
correctly (page 8).
Charging finished
Lit Charging
Flashing Problem with the battery pack or battery pack charger
i
Immediately remove the battery pack from the charger.
i
Do not use an abnormal battery pack. (The usable life of
the battery pack has probably expired.)