– 18 –
3-7. Adjust Specifications
1. Lens Adjustment
Preparation:
POWER switch: ON
If using a ready-made collimator, set to infinity.
Note:
Do not vibrate during the adjustment.
Adjustment method:
1. Set the camera 0 cm from the collimator. (Do not enter any
light.)
2. Set the camera so that it becomes center of the screen in
the collimator.
3. Double-click on the DscCalDi.exe.
4. Click the Focus, and click the Yes.
5. Lens adjustment value will appear on the screen.
6. Click the OK.
Adjustment value determination is effectuated using the "STD_
AFPOS", "FOCUS" and “ZOOM” values.
If STD_AFPOS=s1, FOCUS=focus1, focus2, focus3, focus4,
focus5, focus6, ZOOM=pz_adj and the adjustment values ful-
fill the conditions below, they are determined as within specifi-
cations.
Adjustment value determination
1003<=s1<=1103
focus1=0, -81<=focus2<=+81, -91<=focus3<=+91,
-85<=focus4<=+85, -81<=focus5<=+81, -90<=focus6<=+90
-19<=pz_adj<=19
3-6. The adjustment item which in necessary in part exchange
Camera
Collimator
COMPL PWB CP-1
Factory
Cord
Setting
Language
Setting
COMPL PWB VF-1
COMPL PWB PW-1
COMPL PWB ST-1
Reset
Setting
COMPL PWB CA-1
LENS ASSY
Lens
Adjust-
ment
AWB
Adjust-
ment
USB
storage
information
registration
CCD White
Point
Defect
Detect
Adjustment
CCD Black
Point And
White Point
Defect Detect
Adjustment
In Lighted
CCD
Inter-
channel
Correlation
Adjustment
LCD
: Be sure to carry out the necessary adjustments after replacing the unit.
: Adjustment is possible from the menu setting screen of the camera and by using the calibration software.
DscCalDi
x
OK
Focus Result
STD_AFPOS=1079
FOCUS=0,5,8,5,4,5
ZOOM=-4
!