Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Page 101 Instruction Manual Download

Page: 101 / 166

English

If the modified image is satisfactory,
press the SET button.

The screen to save the corrected
image appears.

To discontinue the procedure, press
the MENU button. The modified
image is discarded, and you are
returned to the Contrast Correction
Screen.

SAVE AS NEW:

The modified image is saved as a
separate image, and the original
image is preserved.

OVERWRITE:

The original file is deleted, and only
the modified image is saved.

Select the desired method to save the modified image, and press the
SET button.

The modified image is saved, and you are returned to the Contrast
Correction Screen.

HINT
Concerning the date and time information for the modified image

The date display that is shown when an edited image is played back is the
date that the image was saved after it was modified.

OVERWRITE

SAVE AS NEW

Select the type of save

Summary of Contents for VPC E1 - Xacti Camcorder - 6.0 MP







































































































































































Search results

Summary of Contents for VPC E1 - Xacti Camcorder - 6.0 MP

Reviews:

Related manuals for VPC E1 - Xacti Camcorder - 6.0 MP

Brands by name

Popular brands

Sanyo VPC E1 - Xacti Camcorder - 6.0 MP, Instruction Manual

Search results

Summary of Contents for VPC E1 - Xacti Camcorder - 6.0 MP

Reviews:

Related manuals for VPC E1 - Xacti Camcorder - 6.0 MP

Brands by name

Popular brands