Computer display adjustment
8
English
: Adjustment method for VGA signal selection
■
Operation
Setting value
Adjustment item
POWER
MODE
AUTO
MENU
MENU
VGA IN
1024x768@60Hz
Brightness
Contrast
H-Position
V-Position
Clock
Phase
Color Temp.
Use Color R
Use Color G
Use Color B
OSD H-Pos.
OSD V-Pos.
Volume
PIP
PIP SIZE/POS.
Language
Recall
26
25
25
32
25
8
User color
51
51
51
25
25
10
Off
DEF. Hot Key
English
q
Press the adjustment control (MENU).
w
Choose the adjustment item.
e
Change the setting value.
r
If necessary, repeat steps
w
and
e
.
Down
Up
e
At the top of the screen, an adjustment
panel as shown in the diagram to the right
will be displayed.
q
w
e
•
Pressing the adjustment control (MENU) again, or waiting for a number of
seconds will cause the adjustment panel to disappear.
■
Adjustment item
Item
Description
Parameters
Default setting
Brightness
Adjust the brightness.
0 – 51
26
Contrast
Adjust the contrast.
0 – 51
25
H-Position*
Adjust the horizontal position of the display.
0 – 51
25
V-Position*
Adjust the vertical position of the display.
0 – 51
32
Adjust the clock (when vertical lines can be seen etc.).
Clock*
•
Make fine adjustments until the vertical lines disappear.
0 – 51
25
Adjusting the clock will also change the width of the display.
Phase*
Adjust the phase (when the screen is flickering, etc.).
0 – 51
8
Color Temp.
Select the color temperature.
9300°K, 6500°K,
User color
User color
User Color R
Adjust the Red (when Color temp. is set to User color).
0 – 51
51
User Color G
Adjust the Green (when Color temp. is set to User color).
0 – 51
51
User Color B
Adjust the Blue (when Color temp. is set to User color).
0 – 51
51
OSD H-Pos.
Adjust the horizontal position of the adjustment panel.
0 – 51
25
OSD V-Pos.
Adjust the vertical position of the adjustment panel.
0 – 51
25
Volume
Adjust the volume.
0 – 51
10
PIP
Select to use Picture in Picture, showing a sub window
Composite, S-Video,
Off
display in the upper left corner.
Component, Off
PIP SIZE/POS.
Changing the sub window display and display position.
Pip Size, Pip Position,
–
(
Page 9)
DEF. Hot Key
English,
中文
,
日本語
,
Language
Select the language of the adjustment panel.
Français, Español,
English
Deutsch, Italiano
Recall
Pressing the +, – buttons together will return the
–
–
settings to the default value.
* Use this when pressing the automatic display adjustment control (AUTO) (page 6) does not achieve the desired result.
Also, by pressing the automatic display adjustment control (AUTO), these values will be changed.
•
The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings
will return to default.
•
The default language display is English. If the language setting is changed, the menu display will be in the
language chosen.
00̲VMC̲L1015̲17̲19̲GB 06.7.19 0:00 PM ページ 8
