PRECAUTION
If an abnormality does occur, turn the power switch
off and unplug the unit. Have a qualified technician
perform any repairs.
Do not use the monitor if it makes a strange noise,
emits a strange odor, or if smoke comes out from it
If used under these conditions, the monitor may cause a
fire or electric shock. Immediately unplug it and wait to
make sure no more smoke comes from it. Then take it to
the dealer for service. Do not try to repair or open the
monitor yourself.
Do not allow the power cord to get damaged
•
Do not place heavy objects on the power cord.
•
Do not place the power cord near a heat source.
•
Do not excessively bend the power cord, modify it, or secure
it with staples.
Doing so may damage the power cord and cause a fire or
electric shock.
If the power cord is damaged, take it to the dealer and
have it replaced.
Do not allow dust or dirt to build up on the
power cord or power outlet
A build-up of dust may cause a short circuit or generate
heat and cause a fire.
Be especially careful when using the monitor in areas of
high humidity, in areas with frequent condensation, in
kitchens, and in places where there is excessive dust.
Periodically unplug the power cord and clean away the
dust that builds up between the plug terminals.
Cautions when plugging in the power cord
•
Make sure you insert the plug of the power cord all the
way in the power outlet. Using the monitor with the
power cord not fully plugged in may cause heat to
generate and cause a fire.
•
Do not use the monitor with the power cord wound or
tied up. Heat may generate and cause a fire.
•
When using an extension cord, be sure that the total
current load of all equipment connected to it dose not
exceed the specified ratings of the extension cord. If the
rating are exceeded, heat may generate and cause a fire.
Make sure to carefully read the specifications
accompanying the extension cord.
Cleaning
•
Dirt can be removed from the cabinet by wiping it with
a soft cloth. To remove stains, wipe with a soft cloth
moistened with a soft detergent solution and wrung dry,
then wipe dry with dry soft cloth.
•
Do not use benzine, thinner or other chemical product
on the cabinet, as that may cause deformation and
paint peeling. Before using a chemical cloth, make sure
to read all accompanying instructions. Make sure that
no plastic or rubber material comes in contact with the
cabinet for a long period of time, as that may cause
damage or paint peeling.
SERVICE
This unit is a precision instruments and if treated with
care, will provide years of satisfactory performance.
However, in the event of a problem, the owner is advised
not to attempt to make repairs or open the cabinet.
Servicing should always be referred to your dealer or
Sanyo Authorized Service Centre.
L8MAG/US (VMC-8614F GB) 2003. 10. 15
3
