background image

CUT OFF

R. CUT OFF

Adjusts red cut off

G. CUT OFF

Adjusts green cut off

B. CUT OFF

Adjusts bluew cut off

CONTROL LOCK

Sets the operation buttons on the
front panel to control lock mode

B. P. S. LEVEL

Sets the level for Brightness Peak
Suppressor function

REMOTE SELECT

Sets the external control function
(ASPECT RATIO or BRIGHTNESS
P.S.)

8

OFF        ON

OFF       ASPT        OFF        B.P.S.

4. To set the other set-up menu items, repeat the pro-

cedures 2 and 3.

5. Press the MENU button to quit.

Notes:

 When the CONTROL LOCK function

is set to ON, pressing operation
buttons on the front panel will display
the message "CONTROL LOCK ON!"
on the screen for about 3 seconds.

 The CONTROL LOCK function is

maintained even when the power is
turned off.

 To turn off the CONTROL LOCK

function, while holding the MENU
button press the PHASE button. Then
set the CONTROL LOCK function to
OFF.

  Even when the CONTROL LOCK

function is set to ON, the following
operations are available:
– Power Switch operation.
– Sound volume adjustment with the

VOLUME/SELECT button.

– Display or disappear of the <SET-

UP MENU> screen.

– External control of ASPECT RATIO

or BRIGHTNESS P.S. when
REMOTE SELECT is set to ON .

* ASPT : ASPECT RATIO

B.P.S.: BRIGHTNESS P.S.

Front panel

Function                     

Contents

button

displayed

MENU

EXIT

Quit (or Release) the <MENU>
screen

Set-up menu items

Purpose

Settings

H. POSITION

V. POSITION

WHITE BALANCE

Adjusts the horizontal position of
the screen (+ : Horizontal position
shifts to the right/–: Horizontal
position shifts to the left)

Adjusts the vertical position on the
screen (+: Vertical position moves
down/–: Vertical position moves up)

Adjusts the white balance

Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.
Screen setting is changed to the selected setting mode.
Select R/G/B buttons corresponding to the function display
to adjust.

DRIVE

R.DRIVE

Adjusts red level

G.DRIVE

Adjusts green level

B.DRIVE

Adjusts blue level

MENU

–09     –08    • • • • • •     –01    00     +01   • • • • • •    +08     +09

–09     –08    • • • • • •     –01    00     +01   • • • • • •    +08     +09

–09     –08    • • • • • •     –01    00     +01   • • • • • •    +08     +09

–09     –08    • • • • • •     –01    00     +01   • • • • • •    +08     +09

–09     –08    • • • • • •     –01    00     +01   • • • • • •    +08     +09

–09     –08    • • • • • •     –01    00     +01   • • • • • •    +08     +09

–09     –08    • • • • • •     –01    00     +01   • • • • • •    +08     +09

–09     –08    • • • • • •     –01    00     +01   • • • • • •    +08     +09

00      01    • • • • • • •     09     10     11    • • • • • • •     19     20

Summary of Contents for VMC-8521P

















Reviews: