Sanyo VCC-P6784, Instruction Manual

Page: 26 / 104

GB
25
Setting Alarm <ALARM>
5
Select [
u
SENSITIVITY] and press the SET button.
R
The SENSITIVITY screen appears.
6
Select <MOVE> and specify a sensitivity level
(1 –10).
R
The greater the number, the lower the responsiveness to
movement becomes.
7
Select <TIME> and specify a detection time of
duration (1 – 60).
R
The greater the number, the lower the detectability against
fast-moving subjects.
■
To confirm the sensitivity of the motion detection
Select [TEST] and press the SET button.
• Make sure that the motion-detected area is properly specified by
placing your hand or other objects in front of the lens.
To finish the test, press the SET button.
Motion Sensor Setting (continued)
ALARM SETTING
ALARM IN
MOTION
AREA
SENSITIVITY
·
ZOOM
ZOOM TIME
DURATION
ALARM SIGN
PRESET
MENU
NO
ON
SET
SET
OFF
5S
5S
OFF
OFF
BACK
u
u
u
y
y
· 5
SENSITIVITY
<MOVE>
<TIME>
1
TEST
PRESET
MENU
SET y
OFF
BACK
MEMO: If [ZOOM] is set to “ON” (see page 26), the corresponding image will be
zoomed in when the motion sensor detects any movement.
If [ALARM SIGN] is set to “ON” (see page 27), the alarm indication “A” will
be shown for all masks if [PRIVACY MASK] is set (see page 21).
L5BY2_US(VCC-P6784)(GB_FR_ES).book 25 ページ ２００７年１２月７日 金曜日 午後３時３９分