Sanyo VCC-P6784, Instruction Manual

Page: 20 / 104

GB
19
Setting Camera Performance
With its default Auto-tracing White Balance (ATW) setting, this unit
is able to obtain natural colors even when the light source is
changed. However, you may manually change the white balance
settings or its mode to obtain better tone, especially when the
screen color does not match actual objects.
■
ATW (Auto-Tracing White balance)
Automatic setting for white balance.
■
AWC (One-Push Adjustment)
Adjusts white balance by shooting white paper or wall.
■
3200 (Halogen light or incandescent lamp, etc.) (Fixed)
Targeted at around 3200 K of color temperature.
■
5600 (Daytime sunlight) (Fixed)
Targeted at around 5600 K of color temperature.
■
FLUO (Fluorescent lamp) (Fixed)
Targeted at around 4200 K of color temperature.
■
MWB (Manual White Balance)
Fine-adjusts red and blue manually.
Select [AWC LOCK] and, with the camera lens directed toward a
white paper or wall, press the SET button.
R
The cursor “
q
” lights off, and white balance adjustment will start. The
adjustment will end after about 2 seconds when “
q
” lights again.
• If the adjustment does not yield a satisfactory result, press the SET
button again.
■
To perform fine adjustment of color
Select [GO TO MWB] and press the SET button.
R
The MWB SETTING screen appears. Follow the MWB SETTING
procedure below.
• The setting mode changes to “MWB”.
Select “R” or “B” to adjust tint (0 – 255).
D Adjusting White Balance <WHITE BALANCE>
SYNC ·
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
OPTION
L-L
OFF
SET
y
y
ATW
NORM
0.45
60
HIGH
SET
y
D
F
H
E
G
AWC (One-Push)
AWC SETTING
AWC LOCK ·
GO TO MWB
SET
SET y
White paper or wall
MWB (Manual White Balance)
MWB SETTING
· R 43
B 66
R : Adjusting Red
B : Adjusting Blue
• The greater the number, the
deeper the tint becomes.
L5BY2_US(VCC-P6784)(GB_FR_ES).book 19 ページ ２００７年１２月７日 金曜日 午後３時３９分