Sanyo VCC-P6784, Instruction Manual

Page: 24 / 104

GB
23
Setting Alarm <ALARM>
If you have connected an external door switch or an infrared sensor, specify the following settings. This unit has a built-in
motion sensor, which outputs alarm signals when any moving subject, such as a would-be intruder, is detected.
1
Select [OPTION] and press the SET button.
R The OPTION screen appears.
2
Select [ALARM] and press the SET button.
3
Select [ALARM IN] and specify a polarity for the
signal.
NO : Normal Open (When closed, detects an alarm input.)
NC : Normal Close (When opened, detects an alarm input.)
■
About an alarm sign
• You can use the alarm setting so that the displayed image will be
zoomed in when the signal is input (see page 26).
• Alarm sign indicates when an alarm signal is input (see page 27).
OPTION
TITLE
PRIVACY MASK
PASSWORD
ALARM
·
LANGUAGE
CONTROL
ADDRESS
ALARM LINE OUT
PRESET
MENU
OFF
SET
SET
SET
SET
COAX
1
OFF
OFF
BACK
y
y
y
y
y
R
The ALARM SETTING
screen appears.
Specifying Alarm Input <ALARM IN>
ALARM SETTING
ALARM IN ·
MOTION
AREA
u
u
u
SENSITIVITY
ZOOM
ZOOM TIME
DURATION
ALARM SIGN
PRESET
MENU
NO
OFF
SET
SET
OFF
5S
5S
OFF
OFF
BACK
y
y
L5BY2_US(VCC-P6784)(GB_FR_ES).book 23 ページ ２００７年１２月７日 金曜日 午後３時３９分