-
13
-
7. CCD Black Point And White Point Defect Detect
Adjustment In Lighted
Preparation:
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
2
)
Adjusting method:
1. Set the camera 0 cm from the pattern box. (Do not enter
any light.)
2. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
3. Double-click on the DscCalDi.exe.
4. Select “CCD Black” on the LCD “Test”, and click the “Yes”.
5. After the adjustment is completed, the number of defect
will appear.
6. Click the OK.
Camera
Pattern box
3-7. The Compulsive boot starting method
1. Keep MENU button and downward arrow button de-
pressed while switching on the power.
2. Connect the camera and the computer with USB cable.
3-8. USB STORAGE INFORMATION REGISTRATION
USB storage data is important for when the camera is con-
nected to a computer via a USB connection.
If there are any errors in the USB storage data, or if it has not
been saved, the USB specification conditions will not be sat-
isfied, so always check and save the USB storage data.
Adjustment method:
1. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
2. Double-click on the DscCalDi.exe.
3. Click on the Get button in the USB storage window and
check the USB storage data.
VID: 0x0474
PID: 0x02C7
Serial:
Rev. : 1.00
4. Check the “Serial” in the above USB storage data. If the
displayed value is different from the serial number printed
on the base of the camera, enter the number on the base
of the camera. Then click the Set button.
5. Next, check VID, PID and Rev. entries in the USB storage
data. If any of them are different from the values in 3. above,
make the changes and then click the corresponding Set
button.
Firmware
QrCode
AWB
Focus
UV Matrix
R Bright
RGB Offset
Tint
B Bright
Gain
Phase
LCD
Calibration
Upload
Initialize
LCD Type
H AFC
Test
VCOMDC
VCOMPP
Cal Data
Cal Mode
OK
OK
EVF
USB storage
Get
Set
VID
Set
PID
Set
Serial
Set
Rev.
Set
Setting
Language
Video Mode
VCO
Factory Code
Backrush pulse :
Set
Get