Sanyo VA-80LAN, Installation Manual

Page: 6 / 72

6
2. Configuring the Network Settings
3
Select the digit to be changed, and specify the
value.
• Use the lever (
vw
) to move “
x
” to the digit you want to change,
and use the lever ( vw ) to select the number.
• If you change the setting item, use the lever vw ) to move “ x ” to
either end, and press the lever ( vw ) toward the same end. This
displays the IP ADDRESS SETTING screen, returning you to
step
2
.
4
Use the lever ( xy ) to select “MENU” – “BACK”,
and press the [ENTER] button.
R
Returns to the NETWORK SETTING screen.
5
To change the port number, use the lever ( xy ) to
select “PORT”, and press the lever to the right ( w ).
R
Use the same procedure as step
3
to change the port number
to your desired value (between 1 and 65535).
6
Use the lever ( xy ) to select “ALARM” and then
use the lever ( vw ) to select the alarm output
option.
• OFF: Disables alarm output from the camera to the
network.
• OUT1: Enables alarm output 1 to be sent to the network.
• OUT2: Enables alarm output 2 to be sent to the network.
• OUT1/2: Enables alarm outputs 1 and 2 to be sent to the
network (default setting).
7
Use the lever (
xy
) to select “MENU”, use the
lever (
vw
) to select “END”, and press [ENTER].
R
Closes the settings screen and returns to the normal monitoring
screen.
• To return to the previous screen, select “BACK” and press the
[ENTER] button.
IP ADDRESS SETTING
IP ADDRESS
192.168.000.052
x
NETWORK SETTING
IP ADDRESS
PORT
ALARM
MAC ADDRESS
08-00-7I-81-25-J2
FIX
00080
x
OUT1/2 y
NETWORK SETTING
IP ADDRESS
PORT
ALARM
MAC ADDRESS
08-00-7I-81-25-J2
FIX
00090
OUT1/2
y
L9EBF_WA(VA-80LAN_INSTALLATION).book 6 ページ ２００６年１２月１１日 月曜日 午前１０時３８分