Sanyo VA-80LAN, Installation Manual, Page: 5 / 72

5
2. Configuring the Network Settings
On the NETWORK SETTING screen, specify the options required for connecting the camera to the network (LAN).
• The NETWORK SETTING screen appears only when the camera is equipped with this option board.
• For displaying the menu screen, refer to the instruction manual supplied with the camera.
• In the following instructions, the lever operations of the system controller (VSP-9000) are shown using xy for vertical operation and vw for horizontal
operation.
1
Use the lever (
xy
) to select “IP ADDRESS”, use
the lever (
vw
) to select the IP address assignment
option, and press the [ENTER] button.
2
Use the lever (
xy
) to select the setting item you
want to change, and press the lever to the right
(
vw
).
R
Only the selected option is displayed on the screen, and “ x ”
appears below the address.
CAMERA
LENS
PAN/TILT
AUTO MODE
PASSWORD
LANGUAGE
OPTION
ADVANCED MENU
SET
SET
SET
SET
SET
SET
SET
SET
y
y
y
y
y
y
y
y
ENTER y
y
OPTION
INFORMATION
AUTO FLIP
NETWORK SET
OFF
SET ENTER
NETWORK SETTING
IP ADDRESS
PORT
ALARM
MAC ADDRESS
08-00-7I-81-25-J2
FIX
00080
OUT1/2
y
Menu screen
Use the lever (
xy
) to select “OPTION”.
OPTION screen NETWORK SETTING screen
Use the lever (
xy
) to select “NETWORK”. Perform the network settings.
FIX : Manual assignment (default: 192.168.0.2)
Go to step
2
(IP ADDRESS SETTING).
AUTO
: Automatic assignment (DHCP)
Confirm the information in the screen, and go to step
4
.
MEMO: The “MAC ADDRESS” cannot be changed.
NETWORK SETTING
IP ADDRESS
PORT
ALARM
MAC ADDRESS
08-00-7I-81-25-J2
FIX
00080
OUT1/2
y
ENTER
R
IP ADDRESS SETTING
IP ADDRESS
192.168.000.002
SUBNETMASK
255.255.255.000
GATEWAY
192.168.000.001
IP ADDRESS SETTING
IP ADDRESS
192.168.000.002
x
L9EBF_WA(VA-80LAN_INSTALLATION).book 5 ページ ２００６年１２月１１日 月曜日 午前１０時３８分