Sanyo TSL-4024P Instruction Manual Download

Page: 42 / 52

CHECKING POWER FAILURE, FAILURE DUE TO
CONDENSATION AND USAGE DURATION

Press the STANDBY/ON button.

Press the MENU button to display the MAIN MENU.

Press the

(or

) button to select the “9.OTHERS”

line, then press the ENTER button.

The (OTHERS) menu appears.

<OTHERS>

*ALARM@LOG

*POWER@FAILURE/DEW

*TERMINAL@SET@@@@SET1

Press the

(or

) button to select the “POWER

FAILURE/DEW” line, then press the ENTER button.

The (POWER FAILURE/DEW/USED TIME)
menu appears.

Example

<POWER@FAILURE>

001@FAILURE@@25-12@07:15

@@@@RECOVERY@25-12@07:30

<DEW>

001@FAILURE@@25-12@11:00

@@@@RECOVERY@25-12@12:00

<USED@TIME>

@@VIDEO@@@@@@@@@00003H

@@POWER@@@@@@@@@00007H

POWER FAILURE . . . . The number of power

failures, and the date and
time of the most recent
power failure and
recovery are displayed.

DEW. . . . . . . . . . . . . . . The number of failures

due to condensation, and
the date and time of the
most recent failure and
recovery are displayed.

USED TIME . . . . . . . . . The video heads usage

duration and the power on
duration are displayed.

Press the MENU EXIT button.

NOTE:

If the MENU RESET button is pressed while the
“POWER FAILURE” and “DEW” data is displayed, the
data is erased. The “USED TIME” data cannot be reset.
“P” will be erased from the digital display.

NK4QG/EX (TLS-4024P GB) Tue. Sept., 10/2002

English

Summary of Contents for TSL-4024P





















































Search results

Summary of Contents for TSL-4024P

Reviews:

Related manuals for TSL-4024P

Brands by name

Popular brands

Sanyo TSL-4024P, Instruction Manual

Search results

Summary of Contents for TSL-4024P

Reviews:

Related manuals for TSL-4024P

Brands by name

Popular brands