DAY/TIME SEARCH
Day/Time Search
This searches for a specified day/time for still images to
be played back.
1
Press the STANDBY/ON button.
2
Press the SEARCH button three times during stop
mode.
ø
“T/D SEARCH 01 00:00” will be displayed on
screen.
3
Press the
l
(or
j
) button to set the desired day,
then press the ENTER button.
4
Press the
l
(or
j
) button to set the desired hour,
then press the ENTER button.
5
Press the
l
(or
j
) button to set the desired minutes.
NOTES:
œ
The setting can be made in 10 minutes
increments only.
œ
For recordings made on other VCRs, the exact
time may not be found even if the minutes are
entered. For tapes recorded on older models of
VCRs produced by this company (the ones
without a minutes setting for the day/time search
function), make sure to set the minutes to “00”.
6
Press the FF (or REW) button.
ø
The desired day/time is searched and a still
image of the recording will appear on-screen.
7
Press the PLAY button.
ø
Playback will start.
NOTES:
œ
If the end of the tape is reached during a search, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
œ
The alarm and day/time data are recorded on the tape
in a similar format. If they overlap, the alarm data will
have the priority. Therefore, when searching for a
day/time when an alarm recording was done, the
day/time search will not stop at the desired location. In
such a case, use alarm scan to find the desired
recording location.
œ
The day/time search function may not operate
correctly if searching for a timer recording time or if
the clock on the recording VCR has been adjusted
using the CLOCK ADJUSTMENT function.
œ
If a recording on a tape extends for over a one month
period, the same day may be present twice on the
tape. If such a day is searched, since there is no
month search setting, the desired day may not be
found.
œ
This function does not operate when a warning
display appears on the digital display.
SECURITY LOCK
The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertently.
1
While holding the SHIFT
«
button, press the
REC/PLAY SPEED
l
button.
ø
“
ö
” appears on the digital display.
To cancel the security lock, while holding the SHIFT
«
button, press the REC/PLAY SPEED
l
button,
“
ö
” will be erased from the digital display.
NOTES:
œ
While the security lock is engaged all commands,
except the one to cancel the security lock, are
disabled.
œ
The security lock cannot be engaged while a menu is
displayed.
œ
The security lock will be cancelled by pressing the
ALL RESET button.
NK4QG/EX (TLS-4024P GB) Tue. Sept., 10/2002
English
35
