Sanyo TLS-S7000P Instruction Manual Download

Page: 26 / 38

SPECIAL PLAYBACK

Alarm Search

To go to the beginning of a desired alarm recording.

Press the SEARCH/AUDIO ON button during stop
mode.

“AL SEARCH 01” will be displayed on screen.

Press the REC/PLAY SPEED

(or

) button to

set the desired alarm number (1 to 99), then press
the FF/CUE (or REW/REVIEW) button.

The desired alarm is searched and a still
image of the beginning of the alarm recording
will appear on-screen.

NOTE:

•

The alarm number is relative to the actual tape
position. (Please refer to the illustration below.)

Press the PLAY button.

Playback will start.

Alarm Scan

To look for an alarm recording by viewing the first 5
seconds of each alarm recording.

Press the SEARCH/AUDIO ON button twice during
stop mode.

“AL SCAN” will be displayed on screen.

Press the FF/CUE (or REW/REVIEW) button.

The unit will advance (or rewind) the tape at
high speed and playback the first 5 seconds of
every alarm recording.

To cancel the alarm scan mode, press the

STOP

button.

While the desired recording is being played back,
press the PLAY button.

Playback will start, alarm scan mode is
cancelled.

NOTE:

•

The alarm scan and alarm search functions will only
be possible if the recording speed was set to 3-hour
mode and the recording duration to 20 seconds or
more.

Day/Time Search

To search for a recording when the date and time the
recording was performed on are known.

Press the SEARCH/AUDIO ON button three times
during stop mode.

“T/D SEARCH 01 00” will be displayed on
screen.

Press the REC/PLAY SPEED

(or

) button to

set the desired day, then press the SHIFT

button.

Press the REC/PLAY SPEED

(or

) button to

set the desired hour.

Press the FF/CUE (or REW/REVIEW) button.

The desired day/time is searched and a still
image of the recording will appear on-screen.

Press the PLAY button.

Playback will start.

NOTES:

•

If during a search the end of the tape is reached, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.

•

Day/time search may not function properly on tapes
used for alarm recording.

•

The day/time search function may not operate
correctly if searching for a timer recording time or
CLOCK ADJUSTMENT time.

Playback

Rewind direction

Fast-forward direction

Actual position

Alarm number 2

Alarm trigger input point

Date/Time Search Example

0H25M39S

T/D SEARCH

01 15

Time

Day

FE4QS/EX (TLS-S7000P GB) Wed. Mar., 24/1999

English

Summary of Contents for TLS-S7000P






































Search results

Summary of Contents for TLS-S7000P

Reviews:

Related manuals for TLS-S7000P

Brands by name

Popular brands

Sanyo TLS-S7000P, Instruction Manual

Search results

Summary of Contents for TLS-S7000P

Reviews:

Related manuals for TLS-S7000P

Brands by name

Popular brands