background image

NORMAL PLAYBACK

Normal Playback

1

Turn on the power to the VCR and TV monitor.

2

Load the video cassette tape.

3

Press the REC/PLAY SPEED 

l

 (or 

j

) button to

select the playback speed.

°

The selected playback speed is displayed on
the digital display.

°

If the playback speed is set to “000”, playback
(step 

4

) will not be possible.

NOTE:

A slow motion effect or accelerated playback
effect can be achieved by using a slower or faster
playback speed than the speed used for
recording.

4

Press the PLAY button.

°

Playback starts.

°

If necessary, adjust the tracking to eliminate
the noise from the picture.

5

To stop playback, press the STOP button.

°

To advance or rewind the tape, press the

FF/CUE

 or 

REW/REVIEW

 button.

NOTES:

A tape recorded on another make of time lapse VCR
cannot be played back on this unit.

A tape recorded on this VCR cannot be played back
on another make of time lapse VCR.

Tracking Control

If there is noise in the image during playback,

1

While looking at the playback picture, press and
hold the TRACKING/V. STILL+ button to minimize
the noise.

2

If it cannot be minimized, press the TRACKING/V.
STILL
– button.

Sharpness Control

Adjust the SHARPNESS control towards “SHARP” or
“SOFT” for the desired sharpness of the image.

Audio Playback

Audio playback is only possible in 3-hour, 12-hour
and 24-hour modes.

The playback speed has to be the same as the
recording speed, for normal playback of the audio.

For a tape recorded in 12-hour and 24-hour recording
modes, to playback the audio, press the
SEARCH/AUDIO ON button after pressing the PLAY
button. “

?

” will be displayed to the left of the playback

speed on the digital display.

NOTE:

Noise will appear in the image when audio playback
is used in 12- or 24-hour modes.

GB 

FE4QS/EX (TLS-S7000P GB) Wed. Mar., 24/1999

 

English

23

Summary of Contents for TLS-S7000P







































Reviews: