SETTING THE SECURITY LOCK
The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertenly.
1
While holding the TRACKING/V.STILL + button,
press the REC/PLAY SPEED button.
°
“
ö
”
is displayed on the digital display.
To cancel the security lock, while holding the
TRACKING/V.STILL + button, press the REC/PLAY
SPEED button, “
ö
” will be erased from the digital
display.
NOTES:
•
While the security lock is engaged all commands,
except the one to cancel the security lock, are disabled.
•
The security lock cannot be engaged while a menu is
displayed.
SETTING THE SW OUT TERMINAL OUTPUT
MENU 2
While recording, different outputs can be selected for the
SW OUT terminal.
1
Press the MENU button to display the MENU 2 (SW
OUT).
2
Press the
l
(or
j
) button to set the “FIELD” (or
“FRAME”).
°
With each press of the button, the setting will
change as indicated below.
NOTE:
•
If “TIMING” is set to FRAME (see step
4
),
“FRAME” will be indicated instead of “FIELD”.
3
Press the
]
button.
°
The “TIMING” setting starts flashing.
4
Press the
l
(or
j
) button to set the “TIMING”.
FIELD . . . 1 pulse is output after each set number of
fields.
FRAME. . 1 pulse is output after each set number of
frames.
5
Press the
]
button.
°
The “8H” setting starts flashing.
6
Press the
l
(or
j
) button to set the “8H”.
Y . . . . . . . When recording in 8-hour mode, a pluse
signal is output.
N. . . . . . . When recording in 8-hour mode, a pulse
signal is not output.
7
Press the PAUSE/SCAN button, the normal screen is
displayed.
°
The setting procedure is now completed.
MENU 2 (Initial screen)
<SW OUT>
FIELD 01
TIMING FIELD
8H Y
<USED TIME>
VIDEO 00000H
POWER 00000H
01
02
03
04
05
10
30
60
NC4QG/U (SRT-612DC GB) Wed. June, 06/2001
22
