NORMAL RECORDING
Record Pause
Recording can be interrupted temporarily.
1
Press the PAUSE/SCAN button during recording.
°
The
“
a
”
and
“
;
”
indicators are displayed on
the digital display.
NOTES:
•
The image appears on-screen but it is not recorded.
•
If a recording pause continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the tape.
2
To resume recording, press the REC button, or press
the PAUSE/SCAN button again.
Recording Check
The image being recorded can be checked.
1
During recording, press the PLAY (REC CHECK)
button.
°
The tape will be rewound and then played back.
The VCR will then return to the previous
recording mode.
NOTE:
•
During recording check operations, recording is
suspended momentarily.
Clog Detection
The recording quality is monitored automatically. When
the heads are dirty and the recording quality deteriorates,
the output at the WARNING OUT terminal becomes 0V
(Low), the “
a
” indicator flashes on the digital display, and
the buzzer sounds.
For more information on how to set this function, refer to
(SET UP) MENU SETTINGS AND SETUP on page 23.
NOTES:
•
To cancel the “
a
” indicator display and reset the
WARNING OUT terminal output, press the STOP or
EJECT button.
•
Clog detection is not possible if recording in 8-hour
recording mode.
NC4QG/U (SRT-612DC GB) Wed. June, 06/2001
13
