PROGRAM TIMER RECORDING
1
MENU 4
There are two program timer recording methods, daily
recording or recording on certain days of the week.
Example 1:
To record on every Saturday from 9:00
AM to 5:00 PM (17:00), in 24-hour
mode (recording speed).
1
Make sure that the set date and time are correct.
2
Load a cassette tape with erasure-prevention tab.
3
Press the MENU button to display the MENU 4
(TIMER SET).
°
“SUN” (Sunday) will be flashing.
4
Press the
]
button, until “SAT” (Saturday) is flashing.
5
Press the
«
button.
°
The recording start hour position starts flashing.
6
Press the
l
(or
j
) button to set the recording start
hour (ex: 09), then press the
«
button.
°
The recording start minutes position starts
flashing.
7
Press the
l
(or
j
) button to set the recording start
minutes (ex: 00), then press the
«
button.
°
The recording stop hour position starts flashing.
8
Press the
l
(or
j
) button to set the recording stop
hour (ex: 17), then press the
«
button.
°
The recording stop minutes position starts
flashing.
NOTE:
•
If the set stop time is earlier than or the same time as
the set start time, the VCR will consider the stop time to
be the following day, and “T” will be displayed next to
the recording stop time.
9
Press the
l
(or
j
) button to set the recording stop
minutes (ex: 00), then press the
«
button.
°
The “SPD” (recording speed) position will start
flashing.
F
Press the
l
(or
j
) button to select the recording
speed (ex: 24), then press the
«
button.
°
“N” will start flashing.
G
Press the
l
(or
j
) button to select “Y”.
Y . . . . . . . . . . . . . . . . recording will take place
N. . . . . . . . . . . . . . . . recording will not take place
°
Repeat steps
4
to
G
to program timer
recordings for other days of the weeks.
H
Press the PAUSE/SCAN button, the normal screen is
displayed.
I
Press the TIMER button.
°
The timer recording indicator
“
n
”
will light on the
digital display, the VCR is now in timer recording
stand-by mode.
NOTES:
•
To modify, cancel or stop timer recording, press the
TIMER button to cancel the timer recording mode.
•
A timer recording of more than 24 hours can only
be set on the last two (7th and 8th) lines. On the
7th line, set the recording start time and set “
öö
”
for the rest of the line. On the 8th line, set “
öö
” for
the START time position, then set the recording
stop time, recording speed, and select “Y” or “N”.
MENU 4 (Initial screen)
<TIMER SET>
START STOP SPD
SUN --:-- --:-- --- N
MON --:-- --:-- --- N
TUE --:-- --:-- --- N
WED --:-- --:-- --- N
THU --:-- --:-- --- N
FRI --:-- --:-- --- N
SAT --:-- --:-- --- N
DLY --:-- --:-- --- N
EXT ¤¤¤¤¤ ¤¤¤¤¤ --- N
Programmed timer recording Example 1
<TIMER SET>
START STOP SPD
SUN --:-- --:-- --- N
MON --:-- --:-- --- N
TUE --:-- --:-- --- N
WED --:-- --:-- --- N
THU --:-- --:-- --- N
FRI --:-- --:-- --- N
SAT 09:00 17:00 24 Y
DLY --:-- --:-- --- N
EXT ¤¤¤¤¤ ¤¤¤¤¤ --- N
NC4QG/U (SRT-612DC GB) Wed. June, 06/2001
15
