Sanyo Sprint SCP-7000, User Manual

Page: 162 / 254

146 Section 2I: Using Sprint PCS Ready Link
have floor.”Continue with the Sprint PCS Ready Link call
as described on the previous page.)
n
To make a Sprint PCS Ready Link call to a group
member, select a group, highlight a group member,
and press and hold
.
n
If one of the group members takes the floor, you will
see the member’s name and Sprint PCS Ready Link
number on the display.
4.
When the call is finished, press .
Making a Sprint PCS Ready Link Call by
Entering a Number
To place a Sprint PCS Ready Link call by entering a number:
1.
From standby mode, enter the Sprint PCS Ready Link
number you want to dial.
2.
Press to place the Sprint PCS Ready Link call.
Continue holding to take the floor and speak.
n
The contact’s name is displayed if there is a matched
number in your Sprint PCS Ready Link List.
3.
Continue with the Sprint PCS Ready Link call, pressing
and holding
to speak and releasing it to allow
others to reply.
Tip: The phone beeps if you press when another party has
the floor.
You can also make a Group Call after checking the group
member. Select
to display group members, highlight
< Call Group > and press and hold during step 3 above.
To redial your last Sprint PCS Ready Link call, highlight
Redial
and press and hold from the Sprint PCS Ready Link List.