Sanyo SCP-2500, User Manual

Page: 42 / 101

Setting Return to Standby Mode
1.
Select
> Settings > Display > Return to Idle
.
2. A message appears. Press OK (left softkey) to continue.
3. Select Automatically or End Key .
Automatically
to return to standby mode automatically
when no key is pressed in 30 seconds.
End Key
to return to standby mode by pressing .
Note: End Key setting affects the phone’s talk and standby times.
Sleep Mode
This feature helps conserve your battery power by restricting
the display.
1.
Select
> Settings > Display > Sleep Mode
.
2.
Select an option and press .
To deactivate this feature, select
Off
.
Location Settings
Your phone is equipped with a Location feature for use in
connection with location-based services that may be available in
the future.
Note:
The Location feature is currently not available.
The Location feature allows the network to detect your position.
Turning Location off will hide your location from everyone
except emergency numbers e.g. 111.
Note: Even if the Location feature is enabled, no service may use your
location without your express permission.
To enable your phone’s Location feature:
1. Select > Settings > Location .
(The Location disclaimer is displayed.)
2. Read the disclaimer and press OK (left softkey).
3.
Select
On
or
Off
.
When the Location feature is on, your phone’s standby screen
will display the
icon. When Location is turned off, the
icon will be displayed.
36 4. Your Phone’s Settings