5
Attention: To lock the front cover firmly, snick it softly until it sounds “Click”
If the blockage is found in floor brush, hose or tubes and the
machine, the machine can be re-operated only after the
blockage is cleaned away completely.
This vacuum cleaner can be used as tip the rubbish out of the
full dust cup.
CAUTION
Be sure to turn the power off and unplug the unit before cleaning.
1. Clear the dust: when the dust collect to the MAX label of the filter,
rubbish shall be tipped from the dust barrel.
1) Press the front cover clip beside the suction socket and open the
front cover.
2) Take out the dust cup and clean the dust away completely.
3) Clean the dust cup with warm water if necessary.
Maintenance
Figure_1 Figure_2 Figure_3 Figure_4
Figure_5 Figure_6 Figure_7 Figure_8
6
2. Clean
Filters:
HEPA filter;
1)
Open the front cover: Press the buttons at the both side of socket hole
and open it slowly.
Figure_9,Figure_10
2) Dump
the
dust collection
out of the dust cup.
Figure_11
3) Rotate the filter and detach from the filter grill. Wash the filter in warm
water and clean it with bush. Then, dry it completely before put it back
to the dust cup. Be sure to dry naturally to prevent deformation.
Figure_12
Motor exhaust filter;
1) Take out the filter (
Figure_13, 14
) and wash in warming water. It can be
used after drying completely before put it back to the dust cup and be
sure to dry naturally to prevent deformation.
It should be rinsed once a year.
If the filter is damaged, a new filter should be replaced.
Figure_9
Figure_12
Figure_10
Figure_11
Figure_13
Figure_14
