14
Operation with the Remote Control Unit (continued)
•
Choose the best position in the room for the remote control unit, which
also acts as the sensor for room comfort and transmits the operating
instructions. Once you’ve found this best position, always keep the remote
control unit there.
•
This appliance has a built-in 5-minute time delay circuit to ensure reliable
operation. When the operation button is pressed, the compressor will start
running within three minutes. In the event of power failure, the unit will
stop.
3. Adjusting the Fan Speed
A. Automatic fan speed
Simply set the FAN SPEED selector button to the
position.
This automatically sets the best fan speed for the room temperature.
B. Manual fan speed
If you want to adjust fan speed manually during operation, just set the FAN
SPEED selector button as desired. [
,
, or
]
4. Fan Only
If you want to circulate air without any temperature control, follow these steps:
STEP 1
Press the MODE selector button to switch to the fan mode
.
STEP 2
Press the ON/OFF operation button.
STEP 3
Press the FAN SPEED selector button to select the fan
speed of your choice (
,
or
).
NOTE
STEP 2
STEP 1
STEP 3
OI-671-14-EG
01_SAP-KRV93EH_EN.fm Page 14 Thursday, February 12, 2004 12:10 PM
