OI-332-013EG
13
Check that the circuit breaker on the power panel is turned on and that
the operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit do not meet your needs
press the setting buttons as described below and change the settings
as desired.
STEP 1
Press the MODE selector button and select the
desired mode.
For heating operation
For dehumidifying operation
For cooling operation
STEP 2
To start the air conditioner, press the ON/OFF
operation button.
STEP 3
Press the TEMP. setting buttons to change the
temperature setting to the desired temperature.
Adjustable temperature range:
30 °C max.—16 °C min.
STEP 4
Set the FAN SPEED selector button to the setting
you want.
If the fan speed is set to
(Automatic), the fan
speed switches automatically, according to the
difference between the actual room temperature
and the temperature setting.
STEP 5
Press the FLAP button and set the airflow direction
as desired.
(Refer to ‘‘Adjusting the Airflow Direction’’
on page 21.)
To stop the air conditioner, press the ON/OFF operation button again.
NOTE
STEP 1
Operation with the Remote
Control Unit
2. Manual Operation
NOTE
STEP 5
STEP 4
STEP 2
STEP 3
K-181AHA P11-P22 (ENG)
10/16/00, 4:32 PM
13
