Sanyo SA-126P, Instruction Manual

Page: 16 / 21

1 2
Always turn off the air conditioner and main power supply before cleaning to ensure safety.
Clean unit
1. Plug out first before cleaning.
2. Clean surface panel with a soft
and dry cloth, Which is soaked
warm water below 40 .
3. Do not use chemical solvent for cleaning.
4. Do not splash water directly to indoor
Air filter
The air filter behind the intake grille should be washed at least
every two weeks or as often as it needs cleaning.
How to clean the air filter:
1. To remove the air intake grille, grasp the tab on the filter
and
pull t
o take out.
* Check earth wire
Vacuum cleaner
Plug out only after
air conditioner
stops at all.
unit, in which there are micro- computer
and circuit plate, they must not be
touched by water.
Is it broken
or loose?
* Check air inlet and outlet of outdoor unit.
L et the filter dry thoroughly before reinstalling it. Do not
2. Vacuum the filter on the dusty side to remove light dust.
3. Wash the filter, cleaner side up under gently flowing water
to wash out accumulated dust and lint.
4. If the filter is very dirty, use a mild household detergent in
the wash water.
Air lock could result
in bad efficiency.
Care and maintenance
operate the air conditioner without the air filter. This
can damage the unit.