22
A
Fig. 12
Fig. 13
9-6. Removing Condenser
(1) Remove splasher plate A fixed to the
condenser.
(Fig. 12)
(2) Remove other screws holding the
condenser.
(Fig. 12)
(3) Grasp lower portion of the condenser with
both hands and tilt it slightly and lift it
carefully from the base pan so as not to
distort the copper tube.
9-7. Removing Propeller Fan
(1) Remove the condenser.
Refer to "9-6. Removing Condenser"
(2) Loosen a nut holding propeller fan on motor shaft using
hex. wrench. (Fig. 13)
To loose the nut securing the propeller fan, hold the fan with
one hand and turn the nut COUNTERCLOCKWISE with
another hand.
(3) Extract the propeller fan from the motor shaft.
9-8. Removing Fan Motor
(1) Remove blower wheel.
Refer to "9-5. Removing Blower Wheel"
(2) Remove propeller fan.
Refer to "9-7. Removing Propeller Fan"
(3) Disconnect motor lead wires.
Refer to "9-2. Removing Electrical Component Box"
(4) Remove 4 screws of the fan motor mounting plate with a
philip screwdriver. (Fig. 14)
(5) Disengage the fan motor from the mounting plate.
NOTE
Fig. 14
