Tab
Slot
Pull out 70mm –
100mm
Cabinet
Grille
9. DISASSEMBLY PROCEDURES
Model
SA– 123AH
Screw holding
the grille
Fig. 1
Fig. 2
Tab
Slot
Grille
Cabinet
Fig. 3
19
These illustrations are based on typical view of a standard
model. Consequently, the shape may differ from that of the
air conditioner which you are servicing.
9-1. Removing Front Grille
(1) Pull out the filter.
(2) Remove the screw holding the grille in place. (Fig. 1)
(3) Slide the side of the grille to the left and right to
disengage the tabs on the left and right sides of the
grille from the slots.
(4) Pull the bottom portion of the grille toward you while
paying attention to the ventilator lever. (Fig. 2 and 4)
Pulling out too far on the bottom of the grille at this point
could damage the tabs at the top. Do not pull the grille out
more than 100 mm.
(5) After confirming that the ventilator lever has been
disengaged from the grille vent, slide the grille upward to
free the two tabs at the top of the grille from the
rectangular holes in the top of the cabinet. (Fig. 3 and 4)
NOTE
NOTE
Ventilator lever
Vent
Fig. 4
