Sanyo PLV-WF20 Owner'S Manual Download Page 72

Page: 72 / 84

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally .

• • • on

• • • off

• • • blinking at the normal rate

(approx. 1 second ON,
1 second OFF)

• • • dim

• • • blinking slow

(approx. 2 seconds ON,
2 seconds OFF)

• • • blinking fast

(approx. 0.5 seconds ON,
0.5 seconds OFF)

Appendix

Indicators

Projector Condition

LAMP

red

READY

green

WARNING

TEMP.

red

WARNING

FILTER

orange

SHUTTER

blue

LAMP 1/2

REP.

orange

The projector is off. (The main On/Off switch is OFF

position or the AC power cord is unplugged.)

The projector is in stand-by mode. Press the ON/

STAND-BY button to turn on the projector.

The projector is operating normally.
(The Shutter is open)

The projector is operating normally.
(The Shutter is closed)

The projector is preparing for stand-by or the

projection lamp is being cooled down. The projector

cannot be turned on until cooling is completed and

the READY indicator lights green.

The projection lamp is being cooled down in the

Power management mode.

The projector is in the Power management mode.

The projection lamp is being cooled down in the

Shutter management mode.

The projector is in the Shutter management mode.

Press the ON/STAND-BY button to turn on the

projector.

The filter is scrolled using the FILTER button on

the remote control or the Filter control function in

the setting menu. When the filter is being scrolled,

the Filter replacement icon and “Please wait...”

message (Fig. 1) appear on the screen.

✽

Fig .1

Filter replacement icon and “Please wait...”

✽

• • • Differs according to conditions.

Summary of Contents for PLV-WF20





















































































Search results

Summary of Contents for PLV-WF20

Reviews:

Related manuals for PLV-WF20

Brands by name

Popular brands

Sanyo PLV-WF20, Owner'S Manual

Search results

Summary of Contents for PLV-WF20

Reviews:

Related manuals for PLV-WF20

Brands by name

Popular brands