16
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote
control codes prevents interference from other remote controls when several projectors or video equipment
next to each other are operated at the same time. Change the remote control code for the projector first before
changing that for the remote control. See “Remote control” in the Setting Menu on page 52.
1
2
Remote Control Code
Part Names and Functions
Check the Reset Switch to "Use position" in the
compartment lid on the back of the remote control.
During holding down the MENU button, press the
IMAGE ADJ. button corresponding times to the
number of the remote control code for the projector.
Remote Control Code
Number of Times
Pressing IMAGE ADj .
button
Code 1
1
Code 2
2
Code
Code 4
4
Code 5
5
Code 6
6
Code 7
7
Code 8
8
Use position
Reset position
Reset switch
IMAGE ADj .
button
MENU button
