manualshive.com logo in svg

Sanyo PLV-HD2000, Manual, Page: 18 / 56

Share
Download
Sanyo PLV-HD2000 Manual Download Page 18

PLV-HD2000    Expand Serial Command Functional Specifications 

 

 

18/56 

8.5.4. CF_H-POS Command 

Command “CF_H-POS_%1” 

[CR] 

Input is 
PC

 

“0000 - nnnn” ---- Directly specify setting value of Horizontal Position   

“nnnn” indicates maximum value, which is current value of 

(Total Dots - Display Dots). 

“UP” ---------------- Increment setting value of Horizontal Position by 1 
“DN” ---------------- Decrement setting value of Horizontal Position by 1 

%1 

Input is 
Video 

“0000 - 4095” ---- Directly specify settign value of Horizontal Position   
“UP”---------------- Increment setting value of Horizontal Position by 1 
“DN”---------------- Decrement setting value of Horizontal Position by 1 

Details 

Set Horizontal Position value (valid only when it is in the normal Power ON status) 
The value set by this command is not stored in projector’s memory.  Therefore, 
when the power is turned to ALL OFF status, the value returns to the original 
setting. (It is stored in Standby mode.) 
Note: When %1 is directly specified, CF_SETDISPADJ as well as this command is 
requied In order to apply the setting value to the display image. 

Acceptable “000” 

[CR] 

Response 

Unacceptable 

“Error Code” [CR] 

 

8.5.5. CF_V-POS Command 

Command “CF_V-POS_%1” 

[CR] 

Input is PC

 

“0000 - nnnn” --- Directly specify settting value of Vertical Position   

“nnnn” indicates maximum value, which is current value of (Total 
Line – Display Line). 

“UP” --------------- Increment setting value of Vertical Position by 1 
“DN” --------------- Decrement setting value of Vertical Position by 1 

%1 

Input is 
Video 

“-mmm - nnnn” --- Directly specify setting value of Vertical Position 
“UP” --------------- Increment setting value of Vertical Position by 1 
“DN” --------------- Decrement setting value of Vertical Position by 1 

Details 

Set Vertical Position value (valid only when it is in the normal Power ON status)     
The value set by this command is not stored in projector’s memory.  Therefore, 
when the power is turned to ALL OFF status, the value returns to the original 
setting. (It is stored in Standby mode.)   
Note: When %1 is directly specified, CF_SETDISPADJ as well as this command is 
requied In order to apply the setting value to the display image. 

Acceptable “000” 

[CR] 

Response 

Unacceptable 

“Error Code” [CR] 

 

Summary of Contents for PLV-HD2000

























































Reviews:

No comments