PLV-HD2000 Expand Serial Command Functional Specifications
16/56
8.4.13. CF_APCTRL Command
Command “CF_APCTRL_%1”
[CR]
%1
“L1” ------------------- Set Auto Picture Control to Level 1.
“L2” ------------------- Set Auto Picture Control to Level 2.
“OFF” ---------------- Set Auto Picture Control to OFF.
Details
Set the level of Auto Picture Control (valid only when it is in the normal Power ON
status)
Acceptable “000”
[CR]
Response
Unacceptable “Error Code” [CR]
8.4.14. CF_BBAL Command
Command “CF_BBAL-%1_%2_%3”
[CR]
%1
“R” ----------- Red
“G” ----------- Green
“B” ----------- Blue
%2
“0”-“2” ------------ Point “0” = 140, Point ”1” = 300, Point “2” = 600
%3
“-32” – “032” ------ Offset value of Gamma adjustment at the point specified in %2.
“000” is the center value.
Details
Set Offset value ot Gamma adjustment at the specifiyed point. (valid only when it
is in the normal Power ON status)
Therefore, when the power is turned to ALL OFF status, the value returns to the
original setting.
Acceptable “000”
[CR]
Response
Unacceptable “Error Code” [CR]