manualshive.com logo in svg

Sanyo PLV-HD2000, Manual, Page: 12 / 56

Share
Download
Sanyo PLV-HD2000 Manual Download Page 12

PLV-HD2000    Expand Serial Command Functional Specifications 

 

 

12/56 

8.4. Image Command 

8.4.1. CF_ BRIGHT Command 

Command “CF_BRIGHT_%1” 

[CR] 

%1 

“000-063” --------- Directly specify setting value of Brightness 
“UP” ---------------- Increment setting value of Brightness by 1 
“DN” ---------------- Decrement setting value of Brightness by 1 

Details 

Set Brightness value (valid only when it is in the normal Power ON status) 
The value set by this command is not stored in the projector’s memory.   
Therefore, when the power is turned to ALL OFF status, the value returns to the 
original setting. (It is stored in Standby mode.)     

Acceptable “000” 

[CR] 

Response 

Unacceptable  “Error Code” [CR] 

 

8.4.2. CF_CONT Command 

Command “CF_CONT_%1” 

[CR] 

%1 

“000-063” --------- Directly specify setting value of Contrast. 
“UP” ---------------- Increment setting value of Contrast by 1. 
“DN” ---------------- Decrement setting value of Contrast by 1. 

Details 

Set Contrast value (valid only when it is in the normal Power ON status) 
The value set by this command is not stored to the projector’s memory.   
Therefore, when the power is turned to ALL OFF status, the value returns to the 
original setting. (It is stored in Standby mode.) 

Acceptable “000” 

[CR] 

Response 

Unacceptable  “Error Code” [CR] 

 

8.4.3. CF_COLOR Command 

Command “CF_COLOR_%1” 

[CR] 

%1 

“000-063” --------- Directly specify setting value of Color.     
“UP” ---------------- Increment setting value of Color by 1. 
“DN” ---------------- Decrement setting value of Color by 1. 

Details 

Set Color value (valid only when it is in the normal Power ON status) 
The value set by this command is not stored in the projector’s memory.   
Therefore, when the power is turned to ALL OFF status, the value returns to the 
original setting. (It is stored in Standby mode.) 

Acceptable “000” 

[CR] 

Response 

Unacceptable  “Error Code” [CR] 

 

8.4.4. CF_TINT Command 

Command “CF_TINT_%1” 

[CR] 

%1 

“000-063” --------- Directly specify setting value of Tint. 
“UP” ---------------- Increment setting value of Tint by 1. 
“DN” ---------------- Decrement setting value of Tint by 1. 

Details 

Set Tint value (valid only when it is in the normal Power ON status) 
The value set by this command is not stored in the projector’s memory.   
Therefore, when the power is turned to ALL OFF status, the value returns to the 
original setting. (It stays in Standby mode.) 

Acceptable “000” 

[CR] 

Response 

Unacceptable  “Error Code” [CR] 

 

 

Summary of Contents for PLV-HD2000

























































Reviews:

No comments