27 OPERATING THE MONITOR
F
F
F
F
F
1) Adjust the H Position so that the left side of the picture frame will move to the left
edge of the display area.
C
C
C
C
C
Press the Auto Button. (Auto Set-up)
D
D
D
D
D
Adjust the image manually by following procedure below when the screen has a
flicker or blur, or the picture does not fit in the display area after performing the Auto
Set-up.
E
E
E
E
E
Adjust the V Position so that the top and bottom of the picture frame will fit to the
display area.
NOTE
n
When the left side of the picture frame moves apart from the left edge of the display
area during the Clock adjustment, adjust steps 1) and 2).
n
Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
n
The picture may flicker during the Clock, H Position and V Position adjustment.
n
In case the picture frame is bigger or smaller than the data display area after the Clock
adjustment, repeat steps from
C
.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
